Differences

This shows you the differences between two versions of the page.

--- leon:settings-handling-requests [2021/02/10 12:39]
marek
+++ leon:settings-handling-requests [2021/12/02 13:33]
rafal [Attach documents by default]
@@ Line 27: / Line 27: @@
 ==== Callsign ====
-This section allows you to choose one of three options:
+[{{ :leon:settings:handling-requests:HR_example.png?240|Example of callsign use}}]
+This configuration allows you to choose one of three options:
   - **Flight number** - in a Handling Request the original flight number is used, as specified for the particular flight. It is the default setting.
@@ Line 33: / Line 34: @@
   - **Operator ICAO** - if the flight number begins with the IATA code, it is replaced by ICAO designator in the Handling Request message.
-Both codes must be defined in operator's General Settings.
+An example of the Handling Request with "Operator IATA" set in the Handling Request configuration presented in the screenshot on the right-hand side. ICAO designator "YYY" is replaced by IATA code "T7".
+Both codes must be defined in the operator's General Settings.
+{{:leon:settings:handling-requests:Callsign setting.png?nolink|}}
 ==== HR status changes ====
@@ Line 123: / Line 127: @@
 ----
+==== Attach documents by default ====
+Here you can select the documents that should be attached to the Handling request by default.
+Once the documents are selected, they will be automatically ticked in the HR email, as per the below screenshot:
-At the bottom of the window, you can tick a checkbox **Attach GenDec** to add General Declaration document to Handling request email.
+{{:leon:settings:handling-requests:attach_default_hr_dcuments2.png?nolink|}}
 ----

Leonsoftware Wiki

User Tools

Site Tools

Differences

Page Tools