wiki
wiki
Breadcrumbs

Trip Type Settings

In this section, a user can select the active trip types and some of the default settings:

image-20260723-131829.png

In this configuration panel, it is possible to set up:

  • Default trip type - the default trip type per operator

  • Active - select active trip types which will be available when creating/editing the trip

  • Default Commercial - possibility to select which ones of the trip types are commercial by default

  • Default ICAO Type - possibility to assign the default ICAO type to a trip type


Default trip type will be applied to the new trips created or booked. The trip type selection can only be made from the active trip types selected in the table located underneath. 'Default trip type' per aircraft can be selected in the Fleet section.

Only the types selected as active will be available in the 'TRIP' tab > 'Type' dropdown.

The inactive trip types will be unticked and dimmed in the OPS FILTER:

1.jpg


The following conditions will apply:

  • A trip type cannot be deselected if:

    • it is already assigned to an aircraft as a default trip type per aircraft

    • it is assigned as a default trip type in the Trip Type Settings

  • Ambulance trip type will never switch to ‘FERRY’ when there are no PAX, PAX = 0, assigned on a flight.